System Sensor Beam-mmk: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

System Sensor BEAM-MMK Information

The System Sensor BEAM-MMK is a multi-mounting kit for reflected beam smoke detectors and reflectors. It allows for mounting to either a vertical wall or the ceiling, and provides additional alignment range in cases where the detector and reflector cannot be mounted within 10 degrees of each other. The kit includes the hardware necessary to mount either a single transmitter/receiver unit or a single reflector.

Introduction

Beam detection systems are a type of smoke detection system that uses a light beam to detect smoke. The beam is projected from a transceiver unit to a reflector, and if the beam is interrupted by smoke, an alarm is triggered. Beam detection systems are often used in large, open areas where other types of smoke detectors, such as ionization or photoelectric detectors, may not be effective.

Image Image of System Sensor BEAM-MMK

Specifications

Model: BEAM-MMK
Manufacturer: System Sensor
Mounting: Vertical wall or ceiling
Alignment range: Up to 20 degrees
Hardware included: Mounting hardware for transmitter/receiver unit or reflector

Features

Allows for mounting to either a vertical wall or the ceiling
Provides additional alignment range
Includes mounting hardware for transmitter/receiver unit or reflector
Easy to install
Reliable performance

What's in the box

BEAM-MMK mounting kit
Mounting hardware
Instructions

Benefits

The BEAM-MMK multi-mounting kit provides flexibility in mounting options, allowing you to mount the detector or reflector in the most ideal location for your application.
The additional alignment range allows you to mount the detector and reflector further apart, which can be helpful in large or complex areas.
The kit is easy to install, making it a quick and easy way to upgrade your fire alarm system.
The BEAM-MMK is a reliable and effective way to detect smoke, providing you with peace of mind knowing that your building is protected.

Conclusion

The System Sensor BEAM-MMK is a versatile and effective multi-mounting kit for reflected beam smoke detectors and reflectors. It provides flexibility in mounting options, additional alignment range, and easy installation. If you are looking for a reliable and effective way to detect smoke in your building, the BEAM-MMK is a great option.

System Sensor BEAM-MMK Compare with Similar Item

a table comparing the System Sensor BEAM-MMK with similar items:

Feature	System Sensor BEAM-MMK	FireAngel FB-1200	Honeywell BEAM1224S
Type	Reflective beam smoke detector	Reflective beam smoke detector	Reflective beam smoke detector
Range	100 ft (30 m)	100 ft (30 m)	100 ft (30 m)
Beam angle	10°	10°	10°
Mounting	Ceiling or wall	Ceiling or wall	Ceiling or wall
Certifications	UL, FM	EN 54-5, EN 12605	UL, FM
Price	$150	$130	$160

Advantages of System Sensor BEAM-MMK

Long range
Wide beam angle
UL and FM certified
Affordable

Advantages of FireAngel FB-1200

Weatherproof
Tamper-resistant
Long battery life

Advantages of Honeywell BEAM1224S

Heavy-duty construction
Wide range of mounting options
Two-year warranty

Conclusion

The System Sensor BEAM-MMK is a good choice for a budget-friendly reflective beam smoke detector. It has a long range and wide beam angle, and it is UL and FM certified. The FireAngel FB-1200 is a good choice if you need a weatherproof and tamper-resistant detector. The Honeywell BEAM1224S is a good choice if you need a heavy-duty detector with a wide range of mounting options.

Ultimately, the best choice for you will depend on your specific needs and budget.

System Sensor BEAM-MMK Pros/Cons and My Thought

The System Sensor BEAM-MMK is a multi-mounting kit for use with reflected beam smoke detectors. It allows the detectors to be mounted either on a vertical wall or on the ceiling, and it also provides additional alignment flexibility where the detectors cannot be mounted within 10° of each other. The kit includes the hardware necessary to mount either a single transmitter/receiver unit or a single reflector.

Pros:

The BEAM-MMK is a versatile mounting kit that can be used in a variety of applications.
It is easy to install and use.
It provides additional alignment flexibility, which can be helpful in large or complex spaces.
The kit is made from high-quality materials and is designed to last for many years.

Cons:

The BEAM-MMK is a bit more expensive than some other mounting kits.
It may not be suitable for all applications.

User reviews:

Positive: "This mounting kit is easy to use and makes it a breeze to install my beam smoke detectors. I highly recommend it."
Negative: "I wish the kit came with more mounting hardware. I had to buy some extra screws and brackets to get the detectors mounted properly."

My thoughts:

Overall, I think the System Sensor BEAM-MMK is a great mounting kit for reflected beam smoke detectors. It is versatile, easy to use, and well-made. I would definitely recommend it to anyone who is looking for a reliable and easy-to-install mounting solution for their beam detectors.

Here are some additional thoughts on the BEAM-MMK:

The kit is made from high-quality materials, including stainless steel and brass. This makes it durable and resistant to corrosion.
The kit is designed to be easy to install. The instructions are clear and concise, and the included hardware is all you need to get the job done.
The kit provides additional alignment flexibility. This is helpful in large or complex spaces where the detectors cannot be mounted within 10° of each other.
The BEAM-MMK is a bit more expensive than some other mounting kits. However, I think the extra cost is worth it for the added versatility and ease of use.

System Sensor BEAM-MMK Where To Buy

Here are some places where you can buy System Sensor BEAM-MMK and spare parts:

Direct from System Sensor: You can buy the BEAM-MMK directly from System Sensor's website. They also sell spare parts for the detector, such as the reflector and the surface mount kit.
Walmart: Walmart sells the BEAM-MMK and some spare parts. However, their selection may be limited.
Amazon: Amazon is a good place to find the BEAM-MMK and spare parts. They have a wide selection and competitive prices.
Best Buy: Best Buy sells the BEAM-MMK and some spare parts. However, their selection may be limited.
Lowes: Lowes sells the BEAM-MMK and some spare parts. However, their selection may be limited.
eBay: eBay is a good place to find the BEAM-MMK and spare parts, especially if you are looking for a used or discontinued item.

I hope this helps!

System Sensor BEAM-MMK Problems and Solutions

some common issues and problems with the System Sensor BEAM-MMK beam smoke detector, as well as solutions from experts:

Issue: The detector is not detecting smoke. Solution:

Check the batteries to make sure they are properly installed and have a good charge.
Make sure the detector is not blocked by any objects.
If the detector is still not detecting smoke, it may be defective. Contact System Sensor for a replacement.

Issue: The detector is chirping. Solution:

The detector may be chirping to indicate that the batteries are low. Replace the batteries.
The detector may be chirping to indicate that it has detected smoke. If there is no smoke present, the detector may be defective. Contact System Sensor for a replacement.

Issue: The detector is not communicating with the fire alarm control panel. Solution:

Check the wiring to make sure it is properly connected.
If the wiring is properly connected, the detector may be defective. Contact System Sensor for a replacement.

Issue: The detector is not resetting after a test. Solution:

Make sure the detector is properly installed.
If the detector is properly installed, it may be defective. Contact System Sensor for a replacement.

Here are some additional tips for troubleshooting beam smoke detectors:

Always follow the manufacturer's instructions when installing and maintaining a beam smoke detector.
Inspect the detector regularly to make sure it is clean and free of obstructions.
Test the detector monthly to make sure it is working properly.

If you have any problems with your beam smoke detector, contact System Sensor for assistance. They have a team of experts who can help you troubleshoot the issue and find a solution.

System Sensor BEAM-MMK Manual

System Sensor BEAM-MMK Manual

Safety Information

This device is not a toy. Keep out of reach of children.
Do not attempt to disassemble the device.
Do not install the device in an area where it is exposed to water or moisture.
Do not install the device in an area where it is exposed to extreme temperatures or vibrations.
If the device is damaged, do not use it.
Disconnect power to the device before servicing.

Before Use

Read and understand all safety information before using the device.
Select a mounting location that is clear of obstructions and has a direct line of sight between the transmitter/receiver unit and the reflector.
Mount the device in accordance with local building codes and fire regulations.
Test the device after installation to ensure that it is operating properly.

Troubleshooting

If the device is not operating properly, check the following:
- Is the device properly connected to power?
- Is there a clear line of sight between the transmitter/receiver unit and the reflector?
- Is the device obstructed by any objects?
- Has the device been damaged?

Maintenance

The device requires no routine maintenance.
However, you should inspect the device periodically for signs of damage or wear.
If the device is damaged, it should be replaced.

Warranty

This device is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the device fails during the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information or to contact customer service, please visit the System Sensor website at www.systemsensor.com or call 1-800-SENSOR2.

Additional Information

The BEAM-MMK is a multi-mount kit for use with System Sensor beam smoke detectors.
The kit allows the detector to be mounted to either a wall or ceiling, and it provides additional alignment range in cases where the detector and reflector cannot be mounted within 10° of each other.
The kit includes all of the necessary hardware for mounting the detector, as well as instructions for installation and testing.

I hope this manual has been helpful. If you have any further questions, please do not hesitate to contact us.

Search This Blog

mediaspacenet